Home » Products » Tube and Pipe » Titanium Seamless Tube/Pipe

Titanium Seamless Tube/Pipe

CSM is specialized in exporting seamless titanium tube and pipe, and owning an annual production of 3,000 tons. CSM seamless pipes and tubes feature high specific strength, corrosion resistance, good cryogenic property, low elasticity modulus, low thermal conductivity and no ferromagnetism.

CSM range of seamless titanium tube and pipe sells broadly around the world. Rigid supervision is executed in terms of quality, including chemical component analysis, air pressure testing, nondestructive testing, eddy current testing and ultrasonic testing. We also have mechanical testing, covering tensile test, flaring test, flattening test, etc.

Successful cases

Project name: MUW-2 Asset Renewal-900 TPD Vacuum Evaporated Salt
Fabricator: Alfa Laval India
End user: Tata Chemical
Material: Ti Gr.12
Size & Qty: 38.1x0.71x6096mm 29546kgs
25.74x1.63x6096mm 9039kgs

Project name: KALTIM-5
Fabricator: DongHwa Entec
Engineering corporation: Toyo Engineering
End user: Pupuk Kaltim
Material: ASTM B338 Gr.2
Size: 25.4 x 0.89 x7522 mm
19.05 x 0.89 x 4340~5320 mm
Qty: 25tons


Gr.1, Gr.2, Gr.3, Gr.7,, Gr.9, Gr.12, Gr.16

Product Parameter
Size Range

Chemical component of selectable material
Type N C H Fe O AI V Mo Ni Pd Ti
GR.1 ≤0.03 ≤0.10 ≤0.015 ≤0.2 ≤0.18           Residual
GR.2 ≤0.03 ≤0.10 ≤0.015 ≤0.3 ≤0.25           Residual
GR.3 ≤0.05 ≤0.10 ≤0.015 ≤0.3 ≤0.35           Residual
GR.7 ≤0.03 ≤0.10 ≤0.015 ≤0.3 ≤0.25         0.12-0.25 Residual
GR.9 ≤0.02 ≤0.10 ≤0.015 ≤0.25 ≤0.15 2.5-3.5 2.0-3.0       Residual
GR.12 ≤0.03 ≤0.08 ≤0.015 ≤0.3 ≤0.25     0.2-0.4 0.6-0.9   Residual
Mechanical capacity of selectable material
GR.1 σb ≥240Mp a 170Mpa ≤σ0.2 ≤310Mp a δ≥24%
GR.2 σb ≥345Mp a 275Mp a ≤σ0.2 ≤450Mp a δ≥20%
GR.3 σb ≥450Mp a 380Mp a ≤σ0.2 ≤550Mp a δ≥18%
GR.7 σb ≥345Mp a 275Mp a ≤σ0.2 ≤450Mp a δ≥20%
GR.9A σb ≥620Mp a 485Mp a ≤σ0.2 δ≥15%
GR.9B σb ≥860Mp a 725Mp a ≤σ0.2 δ≥10%
GR.12 σb ≥483Mp a 345Mp a ≤σ0.2 δ≥18%

Production Flow of Seamless Titanium Tubes and Seamless Titanium Pipes

Productivity (maximum and minimum amount of order)

Lead time
The general lead time is one month. And it actually depends on the amount of the order.

The general way of transportation is by sea. And sea transportation and air transportation are selectable.

Plywood case

As agreed

Distribution partner

Inquiry Form